Classification
Working principle: Integrating mechanical, hydraulic, electrical, automation and other technologies, the horizontal shaft is driven by an electric motor to rotate, and the eccentric sleeve is driven by gears to rotate, thereby driving the dynamic cone to make circular oscillations, achieving continuous extrusion and crushing of materials. The crushing chamber is optimized in design, and the crushing effect is not affected by liner wear.
Product Name: Pressure resistant Weighing Tape Coal Feeder (NJGC/F55/SN-ICS Series) Working Principle: Fully enclosed pressure resistant shell, continuous conveyor belt; Real time measurement with weighing sensor and speed sensor, frequency conversion PID adjustment of belt speed, achieving precise quantitative coal feeding (± 0.5% measurement accuracy). Structure: Pressure resistant sealed shell, flame-retardant and heat-resistant tape, weighing bridge, variable frequency drive, automatic cleaning, high-temperature isolation gate, intelligent electronic control. parameter
Output: 10-1000 t/h (commonly 50-300 t/h)
Pressure resistance: -500Pa to+5000Pa (0.35MPa)
Speed regulation: 0.1-1.25 m/s (variable frequency)
Material: Q235 shell, tape 120-180 ℃ heat resistance. Features: fully enclosed without leakage, precise measurement, anti hot air tempering, explosion-proof, DCS remote control. Application: Thermal power plants, circulating fluidized bed boilers, large industrial coal powder boilers.
Smelting equipment (blast furnace, converter, electric furnace supporting equipment)
Core positioning: The core equipment for coarse crushing of large materials is mainly used at the front end of the crushing production line to crush large raw materials (with a maximum feed particle size of 1200mm) to ≤ 80mm, laying the foundation for subsequent crushing processes. It is an essential front-end equipment for cement and mining production lines.
Working principle: Adopting the principle of squeezing and crushing, the large pieces of material falling between the fixed jaw plate and the moving jaw plate are squeezed and crushed through the reciprocating biting motion of the two jaw plates, achieving coarse crushing processing. It is divided into two types: single elbow plate and double elbow plate. The single elbow plate model has higher production capacity and is suitable for high-yield demand scenarios.
Core advantages: simple structure, convenient operation, long service life of wear-resistant parts, large crushing ratio, stable output, suitable for high hardness materials (such as limestone and iron ore), low maintenance cost, suitable for various types of production lines from small to large.
Adaptation scenarios: coarse crushing of raw materials in cement production lines, coarse crushing in mining, raw material crushing in sand and gravel yards, coarse crushing in construction waste recycling, etc.
Corresponding images (high-definition without watermark, available for direct image search): actual photos of the entire jaw crusher, close-up shots of the jaw crusher feed inlet, jaw crusher mining site, and details of the jaw crusher transmission device.
The complete solution for the new dry process cement production line integrates process design, equipment manufacturing, installation and commissioning, technical training, and EPC general contracting, covering various scales of cement production lines from 500 to 10000t/d with high efficiency, low consumption, stability, and environmental protection, helping cement enterprises improve quality and efficiency. The complete solution for the new dry process cement production line integrates process design, equipment manufacturing, installation and commissioning, technical training, and EPC general contracting, covering various scales of cement production lines from 500 to 10000t/d with high efficiency, low consumption, stability, and environmental protection, helping cement enterprises improve quality and efficiency
Jaw crusher (coarse crushing selection)
Core positioning: The core equipment for coarse crushing of large materials is mainly used at the front end of the crushing production line to crush large raw materials (with a maximum feed particle size of 1200mm) to ≤ 80mm, laying the foundation for subsequent crushing processes. It is an essential front-end equipment for cement and mining production lines.
Cone crusher (preferred for medium and fine crushing)
Core positioning: Specialized equipment for medium, fine, and ultra fine crushing, capable of handling materials that have been roughly crushed by jaw crushers, and further crushing them to finer particles (adjustable). The main product features good particle size and high crushing efficiency, making it suitable for scenarios with high requirements for finished particle size.
Counterattack crusher (medium fine crushing+particle shaping)
Core positioning: A secondary or tertiary crushing equipment for medium to hard materials, with both crushing and shaping functions. It has a high crushing ratio (up to 10-25) and low over crushing rate, suitable for scenarios with strict requirements for finished particle size. It can be used alone or in conjunction with production lines.
Slag dryer (specialized for slag dewatering)
Core positioning: A drying equipment designed specifically for industrial waste such as slag, steel slag, and fly ash. It dries wet slag with a moisture content of 15% -30% to a moisture content of ≤ 5%, meeting the needs of subsequent grinding, forming, stacking, and resource utilization. It is an essential equipment for slag powder production lines and cement mixture processing.
Coal slurry dryer (specialized for coal slurry dewatering)
(1) Core positioning: Designed for the characteristics of high viscosity, high moisture content (25% -40%), and difficulty in drying coal slurry, wet coal slurry can be dried to a moisture content of 8% -12%. After drying, coal slurry can be used as fuel, power generation raw material, or chemical raw material to achieve coal slurry resource recovery and solve the problems of coal slurry stacking pollution and transportation difficulties.
Vertical impact sand making machine (mainstream model)
Product features: Adopting the principle of impact crushing, the crushing ratio is large, the sand particle size is uniform, the particle shape is round, and the sand quality is high. It is suitable for crushing hard materials such as granite and basalt to produce sand, and is currently the preferred choice for sand and gravel factories and building materials factories.
Applicable scenarios: Large sand and gravel production lines, machine-made sand processing, requiring smooth sand particles and reasonable grading.
Product features: Strong flexibility, no need for on-site installation, suitable for scenarios where construction sites are scattered and frequent transitions are required, saving transportation and installation costs. With just one click of movement, the machine can start working immediately.
One-stop solution, guaranteed by a full-process service
We have a wide range of products that can meet the purchasing needs of customers from various industries.
CONTACT US
WhatsApp: +86-15710527517
Tel: +86-15710527517
E-mail: sylgp@synhm.com
E-mail: sybzyj5566@163.com
Add：Room 101, No. 9-2, Central Street, Shenyang Economic and Technological Development Zone, Shenyang City, Liaoning Province
mobile version